| Qty | 50 | 100 | 250 | 500 | 1000 | 2500 |
|---|---|---|---|---|---|---|
| Price | $10.24 | $9.44 | $8.96 | $8.50 | $8.22 | POA |
- All prices are per unit & exclude GST
- Setup Price: Add $60 + GST
- Price includes full colour print




| Qty | 50 | 100 | 250 | 500 | 1000 | 2500 |
|---|---|---|---|---|---|---|
| Price | $10.24 | $9.44 | $8.96 | $8.50 | $8.22 | POA |
Custom BRANDCRAFT Triceratops Basswood Models fix the restless afternoon with nothing to hunt down: fifteen pieces press out of a single A4 sheet and slot together by hand. Kids stuck indoors on a wet school holiday get a project they can finish on their own, then a three-horned dinosaur to stand proudly on the shelf. Print your logo in full colour across the timber, or engrave it for a crisp etched mark that suits the raw grain. The natural basswood is plastic-free, and each kit arrives in a kraft cardboard sleeve with the instructions tucked inside.
Do laser cut basswood edges look burnt?
Usually, yes. A laser cuts by burning through the wood, so the edges of each basswood piece generally show a thin light brown line. This is the normal result of the cutting process, not a flaw in the model.
NOTE: Supplied with a full colour digital print over the entire product.
The product colours cannot be customised. Models are only available in the pre-set colour layout (as per the template) or in a natural wood finish. Branding and setup charges still apply when printing the pre-set colour layout.
Flatpack Sheet: 208mm(w) x 295mm(h) x 2mm(d)
Assembled: 210mm(w) x 84mm(h) x 68mm(d)
Sleeve: 221mm(w) x 310mm(h)
Natural
